header

Food lab

Food lab

The chemical and microbiological test on Food products are carried out in this lab , for example :-

(Juice , soft drinks , grains , legumes ,meat , fish and crustaced , eggs , tobacco and its products , sugar , starch , provender , and other staff ) and the lab includes . 

 

 The chemistry of food unit

The test which are carried out in this lab

 

The following test are carried out in lab :-

The estimating of the metallic elements the estimating of the saccharine , the detection about the colors and the local industrial sweetening , the estimating of the fat , the estimating of the protein , the ratio of the melted solid substances , the detached liquid and other tests .  

 

The used devices in this unit

For example , The Atomic absorption device for estimating the metallic elements , HPLC device for estimating the saccharine , the energy device , the protein -N device (analyzer) , CALDAHL device for estimating the protein , SACSOLIT device for estimating the fat .

-------------------------------------------

The microbiology of food unit

The tests which are carried out in this lab

The following tests are carried out in this lab :-

The counting of ISHERISHYA COLAY bacteria , the counting of COLIPHORM bactteria , the detection about SALMONILLA bacteria , the complete counting of bacteria , the counting of yeasts and molds , the detection about SID MONAS bacteria , and other test .

 

The used devices in this unit

For example , microbes incubator in different temperatures , lominary microscopes , sterilization device , microbes counting device , blenders , and other devices .

 

 

Electrical lab

 

Electrical and Electronic Lab Unit

Electrical Product Testing Unit

 

 

List of test that used on this unit NO
Visual Inspection 1
Product Safety Test:

A -Earthing Contnuity

B - Insulation Test

C - High Voltage Test

D - Leakage Current Test

E - Protection Against Electric Shock

 2
Preformance Test 3
Dry Battery Test 4
Switch and Socket Durability Test 5
Cable and Cord Test 6
Conductor Resistance Test 7
High Voltage Test for Electrical 8
Cord Flexing Test 9
Vacuum Cleaner 10
Moisture Resistance 11
Water Heater Test 12

 

 

Product tested :

1- Refrigerators 2- Vacuums 3- A/C 4- Waching machines 5- Vans 6- Heaters 7- Water Heaters 8- Steam Irons 9- Water Cooler

10- Cooking Equipment 11- Cable and Cords 12- Switch and Sockets 13- Dry Battery 14- Cable Connection

15- Hair Dryers and much more.

 
Most important Device In This Unit NO
Charge and Discharge Tester For Dry Battery 1
Switch and Socket Durability Tester 2
Cord Felxing Test Apparatus 3
Dielectric Tester 4
Vacuum Clear Performance Test Apparatus 5
Lamp Durability Tester 6
Cable Measuring Apparatus 7
Product Safety Tester 8
Water Heater Test Apparatus 9
Preformance Test Board 10
Dielectric Pool Tester For Cable 11
Room For Control Humidity and Temreatur 12
Impact Tester Apparatus 13

 

 

 

----------------------------------------------

 

 

Electrical and Electronic Lab Unit

Electrical  Product Testing Unit (2)

 

List of test that used on this unit NO
Visual Inspection 1
Measurement of Dimensions of Cable and Cord 2
Heat Resistance Test 3

 

 

Product tested :

All About Cable and Cord Products

 

Most important Device In This Unit NO
Measurement of Dimension tester 1
Temperature Resistance Tester 2

 

 

----------------------------------------------

 

 

Electrical and Electronic Lab Unit

Electrical  Product Testing Unit (3)

 

List of test that used on this unit NO
Visual Inspection 1
Recode The Products in Local Network 2
Type Files and Send them to Standards Office 3
Save Copys From Reports and Docments 4

 

 

Product tested :

1) Recive Docments and Send them to Technichal . 

2) Give the Products back after been Tested to Owners .

3) Give The Products Owner Instructions .    

                                 

 

 

 Most important Device In This Unit

 Personal Computer To Type all Products and Send it to Technichal   Form Network

 

 

----------------------------------------------

 

Electrical and Electronic Lab Unit

Electronic  Product Testing Unit

 

List of test that used on this unit NO
Visual Inspection 1
Telephone Test

A- Telephone Wireless Test

B- Telephone Normal TesT

 2
T.V Test 3
Radio Test 4
Electronice Parts Test 5

 

 

Product tested NO
Radio Product 1

T.V Products

2
Telephone Products 3
Personal Computer Parts 4

 

 

 

Most important Device In This Unit NO
Telephones Tester ( Signal Generator) 1

Televion Tester ( Signal T.V Generator

 2
Frequency Tester 3
Radio Tester ( Closed Room) 4

 

 

----------------------------------------------

 

Electrical and Electronic Lab Unit

Lighting  Product Testing Unit

 

List of test that used on this unit NO
Visual Inspection 1
Product Safety Test:

A) Earthing Contnuity

B) Insulation Test

C) High Voltage Test

D) Leakage Current Test

E) Protection Against Electric Shock

 2
Life Test For Lamps 3
Torsion Test For Lamps 4

 

 

Product tested :

All About Lamps and Flashlight and Electrical products.

 

Most important Device In This Unit NO
Lamp Durability Tester 1
Product Safety Tester 2
Torsion Tester 3

 

Metal lab

Mechanical and Metal testing Laboratory

 

 ( Pressure Vessel Unit )

 Tests))

 

Hydraulic pressure test

                                         

 

 

Most important equipment) )

 

Cylinder test
TinCans testing equipment

 micro scan equipment    electronic scanning )   )
dehydrate equipment

                                                        

 

Test sumple ) )

 

Fire Extinguishers

Gas cylinders

TinCans

                                                         

 

   -------------------------------------

 

 (Pressure Vessel Unit )

Tests) )

Fixing test

Electric insolation test

Burning test
Sharp corners and edges test

                                                                                                            

 

 Most important equipment ) )

 

equipment  Electric insolation test

Burning test equipment Horizontal

Vertical Burning test equipment

PH test
Noise level equipment
Sharp corners and edges equipment

                                   

                                 

 

 (Test sumple )

 

All toys

                                                           

 

 

-------------------------------------

 

 ( Metal Testing Unit )

Tests) )

 

Hardness test

test X Ray analyser

Tension and Compression universal    testing m/s

                                                                  

                                                      

  Most important equipment)    )

 

Hardness equipment

 Tension and Compression universal testing  equipment    

X-RAY    equipment X Ray analyser

Surface planer equipment 

   Surface Roughness equipment

electronic Balunce

                                                       

 

(Test sumple )

 

Ferrous and nonferrous materials

Metal pipes

Reinforcing bars

Spare parts

 

Building and Construction Materials Laboratory

 

“ Building and Construction Materials Laboratory “

1- Cement and their products testing Unit and aggregates and fired clay bricks.

 

The tested products in this unit :-

  •  Normal portland cement and quick-hardening portland cement .

    •

  • Sulfate resistant portland cement .

  • Low temperature portland cement .

  • White portland cement .

  • The concrete cement bricks and big bricks .

  • The solid concrete (cement) building bricks .

  • The ready to mix concrete (cubes-cylunders-concrete).

  • The imbricated macadamizing concrete bricks .

  • The prefabricated side walks and concrete pools edges .

  • The cement tile .

  • The prefabricated cellular concrete .

  • The natural pile .

  • The bricks and the blocks which are manufactured from the burnt clay .

 

 

 

The tests which are carried out in this lab :-

  • The smoothness of cement test .

  • The initial / final hardening test .

  • Designation of the standard water content for the cement flexibility .

  • The extension test (LOSHATILI) size stability .

  • The extension test (ATOCLAF) .

  • The pressre and the bend resistance test for the cement cubes and cuboid .

  • The whiteness degree (The white portland cement) .

  • The descent of the concrete test to determine the straightness of the straightness the concrele .

  • The concrete bonding coefficient .

  • The pressure resistance test (cubes , cylinder , for the cement solidity).

  • Sand analyzation test by using the sieve .

  • The big pile alalyzation test by using the sieve .

  • The designation of the big pile shock resistance .

  • The designation of the big pile abrasion resistance .

  • The designation of the clay and the soft material ratio in the natural pile .

  • water absorption test for the different types bricks and blocks .

  • Pressure resistance test .

  • The dimensions of the samples measuring test .

  • The dry weight and the wet weight of the samples test .

  • The designation of the essential weight of the mass .

 

 

 

The important devices in the unit :-

  • Computerized massive pressure machime 300KN .

  • Manual massive pressure machime 3000KN .

  • Pressure and bend machine for the cement cubes .

  • BLAINE device .

  • MONA mixer (multi) .

  • Samples shaking device (cement MONA) .

  • Concrete Samples skaking device .

  • VICAT manual device .

  • Mechanical / electronic balancer .

  • Samples processing pools .

  • ATOCLIF device .

  • Water heating bath .

  • LOSHATILI cylindric equipments .

  • The molds of preparing the samples from the cement MONA .

  • The molds of preparing the samples from the prefabricated concrete .

  • The determination of the air level in the prefabricated concrete device .

  • A group of standard sieves .

  •  Standard sieves shaking device .

  • Samples distributor of the pile .

  • Scaled transparent test tubes .

  • The shock test device .

  • LOCANGELES device .

  • Air dryer - dimensions measuring device .

 

 

------------------------------------------------

 

 

2-Ceramic sanitary Appliances and Ceramic Tiles Testing Unit.

 

The tested products in this unit :-

  • Ceramic sanitary appliances (general requirements) .

  • Sanitary appliances - flush tank .

  • Ceramic sanitary appliances - Eastern toilets and elbows .

  • Ceramic sanitary appliances - Western toilets .

  • Ceramic sanitary appliances - rinsers .

  • Ceramic sanitary appliances - lavatory .

  • Ceramic sanitary appliances - compressed flush tank .

  • Sanitary appliances - flush tank equipments .

  • Sanitary appliances - flush tank equipments .

  • Sanitary appliances - The taps : showers and rinsers hoses .

  • Ceramic tiles .

 

 

 

 The test which are carried out in this unit :-

  • The thickness measuring .

  • The visual examination of the appearance .

  • The percentage of the water absorption .

  • Breaking resistance .

  • Abrasion resistance .

  • Staining and deviation resistance .

  • The chemical resistance .

  • Dimensions and disparities .

  • Scratching resistance .

  • The break coefficient by bend .

  • The pool capacity .

  • The discharge capacity .

  • The leakage and the capacity test .

  • The discharge of the solid materials test .

  • The paint test (The discharge of the liquid material - water changing) .

  • The vacuum capacity of the flush tank .

  • The distribution ratio of the flush tank .

 

 

 

The most important devices in this unit :-

  • The ATOCLIF device for testing the breaking resistance of the ceramic product paint .

  • A machine to test the tolerance of the tiles .

  • The abrasion resistance of the tiles surface device .

  • The examination box B.A.I. to examine the sample after its day .

  •  Electrical dryer 100L (25S) .

  • Electronic balancer (the balancer capacity reached 2kilograms and with accuracy reached 0.01 gram).

  • The metal group for solidity test (scratching resistance).

  •  A general measurement to measure the concavity and the convexity of the sides , and the bend , the curve and the folding of the ceramic tiles .

  • Measurement caliper (vernier) sive (0-500 millimeter) , (0-1000 millimeter) multi .

  • Tiles cutter and rinser in 45 , size 410x millimeter (electrial) .

  • A discharge tank device to designate the water absorbability of the ceramic products .

  • The vapors cover device to remove the hazardous rising vapors during heating the required acids to test the chemical resistance of the sanitary appliances .

  • A sand-bath X 300 (600 millimeter).

  • A pot and a gas stove to heat the samples .

  • Glass tools set and related chemicals and equipments .

  • Standard metallic tiles to calibrate the general measurement device .

 

 

The Chemical Lab

The Chemical Lab

The Gaseous Chromatograph unit

 

 

The products :- makeup - food - air refreshers - organic compositions .

The tests :- estimating the organic compositions - estimating the vitamins - estimating the hormones - estimating  the sebaceous acids - estimating the percentage of alcohols .

The devices :- The gaseous chromatograph device supplied with a mass spectroscope (GC  / MS) - HPLC device - ECD and FID gaseous chromatograph device supplied with a reagent .

 

 

 

-----------------------------------------------

 

 

 

The Chemical Lab

The Radiational Measurement unit

 

The products :- water - food - building materials .

The detection about the radioisotopes and the estimating of its activity .

The devices :- Gamma analyzer device - Alpha analyzer device .

 

 

 

-----------------------------------------------

 

 

The Chemical Lab

The Eetimating of the Metallic Elements unit

 

The products :- bottled water - non - bottled water - food - detergents - make up - metals - water solutions .

The tests :- Estimating all the metallic elements and the toxic elements .

The devices :- The Atomic Absorption device .

 

 

-----------------------------------------------

 

 

The Chemical Lab

The Inorganic Tests unit

 

The products :- makeup - water - food - cement - detergents - fertilizers .

The tests :- producing and preparing of the samples - the derivation operations - PH measurement .

The devices :- The distillation devices - burning stoves - drying stoves .

 

 

 

-----------------------------------------------

 

 

The Chemical Lab

The Petroleum Products unit

 

The products :- Engine's oils - automatic transmission's oils - hydraulic's  oils - gear's oils - Industrial oils - benzene - brake oils - cooling water .

The tests :- the viscosity test at 40 C and 100 C , calculating the viscosity coefficient , calculating the burning point , calculating the flowage point , calculating the foam , calculating the total number .

The devices :- a device to calculate the burning point , a device to calculate the flowage point , a device to calculate the foam , a device to measure the sulfur , a device to filtrate the benzene , a device to test the viscosity at 40 C and 100 C , the viscosity devices at  low temperature .

  

 

 
 

The General Materials Lab

The General Materials Lab

The unit's Name :- The Enviromental test's unit (1-18-401)

 

 

The tested products in this unit :-

  1. The different types of paints .

  2. Electricity and water meters boxes .

  3. The different type of plastic plates .

  4. The plastic pipes .

  5. The painted metallic plates + The metallic rings of the shoes .

 

 

 

The used devices in this unit :-

  1. The humidity test device .

  2. The softening point test device (VICAT) .

  3. The accelerated weathering test device .

  4. A device to test the rain resistance of the electricity and the water meters boxes .

  5. A device to test the dust resistance of the electricity and the water meters boxes .

  6. A device to test the pressure of the pipes .

  7. A device to test the salts' sprinkling .

  8. A device to test the water's pressure of the flexible plates .

  9. A device to prepare the samples .

 

-----------------------------------------------

 

The General Materials Lab

The unit's name :- The General materials tests unit (2-18-401)

 

The tested products in this unit :-

  1. The different types of glue .

  2. The different types of shoes .

  3. The different types of furnitre .

  4. Tires .

  5. Melamine .

  6. The plastic pipes .

  7. The plastic plates .

  8. The painted glass panes .

  9. The car's glass .

  10. The acidic batteries .

 

The used devices it this unit :-

  1. A device to test the side parts of the tires .

  2. A device to test the potential of the seat's frame + The shock test (The alternating seat + the back potential test) .

  3.  A device to test the seat's shock + the table's potential test .

  4. A device to test the movement of the closets and the drawers doors .

  5. A device to test the chair's rotation .

  6. A device to test the bend of the shoes .

  7.  A device to test the shoelace .

  8. A device to test the glue isolation ability of the shoes .

  9. A device to test the shoes shock .

  10. A device to test the electrical insulation of the shoes .

  11. The shoe's water vapor conduction device .

  12. A device to measure the ratio of the molten mass .

  13. A device to test the shock of the plastic pipes and plates .

  14. A device to test the package's fall .

  15. A spectral phitometer device to analyzer the formal denyde urea in the melamine .

  16. A device to measure the density .

  17. A device to measure the solidity .

  18. A device to measure the density .light penetration of the glass and the plastic .

  19. The chair's strength .

 

-----------------------------------------------

 

 

The General Materials Lab

The unit's name :- The Materials tests unit (3-18-401)

 

The tested products in this unit :-

  1. Thermal and water insulator .

  2. The plastic nets .

  3.  The plastic pipes .

  4. The plastic plates .

  5. The cardboard .

  6. The fiber glass .

  7. The glue .

 

 

 

The used devices it this unit :-

  1. Straining test device (100 kilogram) .

  2. Straining test device (1 ton) .

  3. Straining test device (2 tons) .

  4. Straining test device (10 tons) .

  5. The card board and plastic's pressure device .

  6. A device to test the crack and the stress of the plastic .

 

 

 

-----------------------------------------------

 

 

The General Materials Lab

The unit's name :- The Packaging test unit (4-18-401)

 

The tested products in this unit :-

  1. Medical injection .

  2. Plastic pipes .